Function Test; Introduction; Warm Up Time; Ambient Conditions - Agilent Technologies E4991A Service Manual

Rf impedance/material analyzer

Hide thumbs Also See for E4991A:

Table of Contents

Performance Test and Function Test

Function Test

This section provides the test procedures used to verify that the E4991A's performance

characteristics are met. The function tests is recommended to be performed with the

E4991A performance test.

Allow the E4991A to warm up for at least 30 minutes before you execute any of the

performance tests

Perform all function tests in ambient conditions of 23 °C ± 5 °C, 70% RH.