How to Create a Delta Marker
Create a Normal marker and move it to the reference position.
Press Delta. The marker becomes the reference marker. It becomes fixed at its
Move the Delta marker by entering a value with the numeric keypad, by using
Press
How to move the Reference marker
Press
Move the marker to the new position.
Then press
Marker Table
The Marker Table, displayed at the bottom of the FieldFox screen, is used to
simultaneously display information for ALL markers. The marker table
"squeezes" the graticule area when activated.
With NA mode Multi-trace configurations, the marker table appears for ALL
traces, although some windows show only markers 1, 2, and 3. Learn more about
Multi-trace configurations on page 21.
How to display the Marker table
Press Marker .
Then
Coupled Markers
Coupled Markers, available in NA mode only, allows you to simultaneously create
and move markers that have the same number for all traces. For example, when
marker 2 is created on a trace, a marker 2 is created for ALL traces. When any
marker 2 is moved, they all move together to the same X-axis position.
Coupled markers are allowed only in NA mode and are relevant only in multi-
You can have markers that are coupled, and others that are uncoupled.
Peak functions move the marker to the peak on the active trace, while all other
78
X-Axis position.
the ▲|▼ arrows, or using the rotary knob.
when finished.
Enter
Delta
to turn the Delta marker OFF.
again, to turn the Delta marker back ON.
Delta
Marker Table On
trace configurations.
markers move to the same X-axis position.
Off.
N9923A FieldFox User's Guide