Marker; Select Marker; Marker Type - Agilent Technologies X Series Manual

Complex Spectrum Measurement

Marker

Marker
Accesses a menu that enables you to set the marker parameters.
Key Path
Initial S/W Revision

Select Marker

Displays 12 markers available for selection.
Key Path
Initial S/W Revision

Marker Type

Sets the marker control mode as described under
dependencies detailed under the key description are enforced when the remote command is sent.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
230
Front-panel key
Prior to A.02.00
Marker
Prior to A.02.00
,
Normal
Marker
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
MODE POSition|DELTa|OFF
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
MODE?
CALC:SPEC:MARK:MODE OFF
CALC:SPEC:MARK:MODE?
If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
the same time,
Marker X Axis Value
Default Active Function: the active function for the selected marker's current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area displays the marker value to its full entered precision.
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
Normal | Delta | Off
and . All interactions and
Delta Off
appears on the Active Function area.
Marker Trace rules. At