Show Fip-Snooping Sessions - Dell Z9500 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
8.3.19.0
8.3.12.0
Usage The following describes the show fip-snooping fcf command shown in the
Information
following example.
Field
FCF MAC
FCF Interface
VLAN
FC-MAP
ENode Interface
FKA_ADV_PERIO
D
No of ENodes
FC-ID
Example
Dell# show fip-snooping fcf
FCF MAC
Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22
2

show fip-snooping sessions

Display information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode
interface and MAC address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name (WWNN) and the worldwide port name (WWPN).
Z9500
Syntax
show fip-snooping sessions [interface vlan vlan-id]
FCoE Transit
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Description
MAC address of the FCF.
Slot/port number of the interface to which the FCF is
connected.
VLAN ID number the session uses.
FC-Map value the FCF advertises.
Slot/ number of the interface connected to the ENode.
Time (in milliseconds) during which FIP keep-alive
advertisements transmit.
Number of ENodes connected to the FCF.
Fibre Channel session ID the FCF assigns.
FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
100 0e:fc:00 4000
745