Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Example
The following example specifies yahoo.com as the DHCP client domain
name string.
Console(config-dhcp)#
netbios-name-server
Use the netbios-name-server DHCP Pool Configuration mode command to
configure the NetBIOS Windows Internet Naming Service (WINS) servers
that are available to Microsoft Dynamic Host Configuration Protocol
(DHCP) clients. Use the no form of this command to remove the NetBIOS
name server list.
Syntax
netbios-name-server
no netbios-name-server
Parameters
ip-address—Specifies the NetBIOS WINS name server IP address. One IP
address is required, although up to eight addresses can be specified in one
command line.
Command Mode
DHCP Pool Host Configuration mode
DHCP Pool Network Configuration mode
Default Configuration
No bios server is defined.
Example
The following example specifies the IP address of a NetBIOS name server
available to the DHCP client.
Console(config-dhcp)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
666
DHCP Server Commands
CLI\files\DCHP_Server.fm
domain-name
ip-address
ip-address2
[
netbios-name-server
yahoo.com
ip-address8
...
]
10.12.1.90
Advertisement
Table of Contents
