Using Help; (Question Mark Key); Table 6: Help Commands - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide

Using Help

? (Question Mark Key)

60
host1(config-if)#show privilege group superUser
The following groups are directly reachable:
14
dailyAdmin
The following groups are reachable:
1
14
2
3
4
basicUser
dailyAdmin
dailyTroll
minUser
There is no no version.
See show privilege group.
The system CLI provides a variety of useful context-sensitive help features. An important
thing to remember about using the help features is that the use of a space or the lack of
a space before the ? gives different results. Table 6 on page 60 describes the help system.

Table 6: Help Commands

Command Description
? Lists all keywords applicable to the current command mode
help Displays a brief description of the help system
(available in all command modes)
partial-keyword? Lists the keywords that begin with a certain character string
partial-keyword<Tab> Completes the partial keyword you entered, if you have provided an
unambiguous abbreviation
command<Space>? Lists the set of all valid next available choices
Commands listed in the left column of Table 6 on page 60 are further described with
examples in the following sections.
You can use the question mark (?) key whenever you need additional information. When
you enter ?, all available choices are displayed. The CLI then redisplays the command
you typed. The following examples show different ways you can use the ? key.
When you use ? on a line by itself or when it is preceded by one or more spaces, a list of
all next available choices is displayed.
Copyright © 2010, Juniper Networks, Inc.