Replacing The Axis-5 Cabling - ABB CRB 15000 Product Manual

Hide thumbs Also See for CRB 15000:

Table of Contents

5.3.6 Replacing the axis-5 cabling

Location of the cable harness

The cable harness is located as shown in the figure.

xx2100000061

Summary of the replacement procedure

This is a brief summary of the replacement procedure, containing the major actions

to be performed.

Product manual - CRB 15000

3HAC077389-001 Revision: E

1 Remove the tubular cover.

2 Separate the cabling between the tubular and the tilt (at the axis-4 joint unit).

3 Remove the tilt and place on a workbench.

4 Remove the axis-6 joint unit.

5 Remove the axis-5 cover.

6 Remove the axis-5 joint unit.

7 Replace the cabling.

5.3.6 Replacing the axis-5 cabling

Continues on next page