ABB CRB 15000 Product Manual page 711

Refitting the axis-6 joint unit
1
2
3
Product manual - CRB 15000
3HAC077389-001 Revision: E
Action
Fit the lifting aid to the joint unit.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
Fit two guide pins to the joint unit.
Place the cabling at the slot before refitting the
joint unit.
© Copyright 20212022 ABB. All rights reserved.
5.6.6 Replacing the axis-6 joint unit
Note
Joint unit: 3HAC079143-001
Lifting aid: 3HAC077789-001
Screws: M3x12 (4 pcs)
xx2000001957
Guide pin, M3x110: 3HAC077787-
001
Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.
xx2000002438
xx2100000041
Continues on next page
5 Repair
Continued
711