5 Repair
5.6.3 Replacing the axis-3 joint unit
5.6.3 Replacing the axis-3 joint unit
Location of the axis-3 joint unit
The joint unit is located as shown in the figure.
xx2000002020
Summary of the replacement procedure
This is a brief summary of the replacement procedure, containing the major actions
to be performed.
Continues on next page
598
1 Disconnect the cabling between the lower arm and the upper arm.
2 Remove the upper arm and place on a workbench.
3 Remove the housing cover.
4 Replace the joint unit. Move the cabling from old to new joint unit.
© Copyright 20212022 ABB. All rights reserved.
Product manual - CRB 15000
3HAC077389-001 Revision: E