ABB CRB 15000 Product Manual page 509

Required spare parts
Spare part
Swing
Flange socket head screw with
glue
Cable tie
Required tools and equipment
Equipment
Lifting aid
Guide pin, M4x120
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Grease
Cable ties
O-ring
O-ring
Product manual - CRB 15000
3HAC077389-001 Revision: E
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 20212022 ABB. All rights reserved.
Article number Note
3HAC073933-001 Also order new attachment
screws for the axis-2 joint unit:
3HAB3413-435 (12 pcs).
3HAB3413-435 M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3.
- Content is defined in section
Standard toolkit on page
Article number Note
- Isopropanol
- Loctite 574
3HAC042536-001 Shell Gadus S2
-
3HAC061327-047 Cover for axis 2/3
Replace if damaged.
3HAC061327-044 Lower arm, inner cover. 1 pcs /
cover.
Replace if damaged.
5 Repair
5.5.2 Replacing the swing
Continued
749.
Continues on next page
509