ABB CRB 15000 Product Manual page 514

5 Repair
5.5.2 Replacing the swing
Continued
3
4
5
Continues on next page
514
Action
Remove two attachment screws and fit two guide
pins to the axis-2 joint unit.
Remove the lower arm attachment screws.
Use two fully threaded attachment screws as re-
moval tools to press the lower arm out of position.
© Copyright 20212022 ABB. All rights reserved.
Note
Guide pin, M4x120: 3HAC077786-
001
Always use guide pins in pairs.
xx2000001951
xx2000001960
xx2000001940
xx2000002151
Product manual - CRB 15000
3HAC077389-001 Revision: E