ABB CRB 15000 Product Manual page 256

5 Repair
5.3.5 Replacing the axis-4 cabling
Continued
Separating the cabling between the tubular and the tilt
1
2
3
Continues on next page
256
Action
Cut the cable ties, if needed.
Remove the functional and protective earth cables
by removing the screw.
Snap loose and disconnect the connectors:
• J4/5.DC+
• J4/5.DC-
• J4/5.CS
• J4/5.CP
© Copyright 20212022 ABB. All rights reserved.
Note
xx2000002124
xx2000002086
xx2000002087
xx2000002089
Product manual - CRB 15000
3HAC077389-001 Revision: E