ABB CRB 15000 Product Manual page 151

3
Laying down the robot
1
2
Product manual - CRB 15000
3HAC077389-001 Revision: E
Action
Prepare a working bench where the robot can be
laid down on its back with the base socket outside
the table edge.
Action
CAUTION
The CRB 15000 robot weighs 28 kg. A minimum
of two persons are required for lifting as well as
securing the robot in order to avoid any damage,
instability, and injury.
Loosen the robot from the foundation.
• Person 1: keep holding the robot stable.
• Person 2: loosen the robot base from the
foundation by removing the attachment
screws and washers.
• Both persons: grasp the robot at appropri-
ate locations and lay it down on its back on
a working bench. Do not damage the base
socket.
CAUTION
Do not leave the robot standing unfastened to the
foundation, it is not stable on its own.
© Copyright 20212022 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the base cabling
Note
xx2100000414
Note
xx2100000415
xx2100000414
Continues on next page
Continued
151