ABB CRB 15000 Product Manual page 222

5 Repair
5.3.4 Replacing the axis-3 cabling
Continued
Required spare parts
Spare part
Cable harness, joint 3
Cable tie
Required tools and equipment
Equipment
Lifting aid
Guide pin, M4x120
Protection plate
Cable tie gun EVO7
Standard toolkit
Required consumables
Consumable
Cable ties
O-ring
O-ring
Grease
Cleaning agent
Flange sealant
Continues on next page
222
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 20212022 ABB. All rights reserved.
Article number Note
3HAC073207-001 Also order new Cable tie:
3HAC075545-001.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3.
3HAC077790-001 For protection of drive board
during cabling installation on joint
unit.
- HellermannTyton 110-70084 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
-
3HAC061327-047 Cover for axis 2/3
Replace if damaged.
3HAC061327-044 Lower arm, inner cover. 1 pcs /
cover.
Replace if damaged.
3HAC042536-001 Shell Gadus S2
- Isopropanol
- Loctite 574
749.
Product manual - CRB 15000
3HAC077389-001 Revision: E