ABB CRB 15000 Product Manual page 495

Refitting the base cover
1
2
Product manual - CRB 15000
3HAC077389-001 Revision: E
Action
Wipe, lubricate and fit the o-ring to its groove.
Replace if damaged.
Refit the bottom cover with the attachment screws.
Note
Fit the cover in correct direction, the protrusion
of the cover must face outwards.
© Copyright 20212022 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued
Note
O-ring, nitrile rubber: 3HAB3772-
64
Grease: 3HAC042536-001 (Shell
Gadus S2)
xx2000002016
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (8 pcs)
Tightening torque: 1.2 Nm.
xx2000002007
xx2100000268
Continues on next page
495