5 Repair
5.5.1 Replacing the base
Continued
Securing the base
1
Refitting the swing
1
Continues on next page
496
Action
Lift the base to standing and secure it to the
foundation with the attachment screws and
washers.
Action
Clean the mounting surface with isopropanol.
Apply flange sealant to the corner of the base
mounting surface, as pointed out in the figure.
© Copyright 20212022 ABB. All rights reserved.
Note
Attachment screws: M10x35 8.8 (4
pcs).
Washers: 23/10.5/2.5 mm Steel (4
pcs).
Tightening torque: 30 Nm ±10%.
xx2000002006
Note
Cleaning agent: Isopropanol
Flange sealant: Loctite 574
xx2000001990
Product manual - CRB 15000
3HAC077389-001 Revision: E