ABB CRB 15000 Product Manual page 646

5 Repair
5.6.4 Replacing the axis-4 joint unit
Continued
Refitting the tubular cover
1
2
Refitting the axis-4 cover
1
Continues on next page
646
Action
Wipe, lubricate and fit the o-ring to its groove.
Replace if damaged.
Refit the cover with new attachment screws.
Action
Fit the o-ring to its groove.
Replace if damaged.
© Copyright 20212022 ABB. All rights reserved.
Note
O-ring: 3HAC061327-043
Grease: 3HAC042536-001 (Shell
Gadus S2)
xx2000002149
Flange socket head screw with
glue: 3HAB3413-312
M3x12 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue
For tubular cover.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
Tightening torque: 1.6 Nm.
xx2000002123
Note
O-ring: 3HAC061327-051
xx2000002092
Product manual - CRB 15000
3HAC077389-001 Revision: E