ABB CRB 15000 Product Manual page 139

2
3
4
5
Product manual - CRB 15000
3HAC077389-001 Revision: E
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Remove all covers required to achieve visibility
of all cabling.
Visually inspect all arm cabling.
Look for abrasions, cuts or crush damages.
If any damage is detected, replace the cabling.
Refit all covers.
If any cover is damaged, it must be replaced.
CAUTION
Be careful not to squeeze any cabling during the
refitting procedure.
© Copyright 20212022 ABB. All rights reserved.
4.3.2 Inspecting the cable harness
Note
The
44.
Replacement information for the
covers, such as pare part numbers
and tightening torques for the at-
tachment screws are detailed in
section Tightening torques to be
inspected on page
4 Maintenance
Continued
135.
139