ABB CRB 15000 Product Manual page 248

5 Repair
5.3.5 Replacing the axis-4 cabling
Continued
Spare part
Cable harness, joint 4
Cable tie
Required tools and equipment
Equipment
Lifting aid
Guide pin, M3x110
Tweezers
Protection plate
Cable tie gun EVO7
Standard toolkit
Required consumables
Consumable
Cable ties
O-ring
Gasket
O-ring
O-ring
Flange socket head screw with
glue
Cleaning agent
Flange sealant
Continues on next page
248
Article number
3HAC073206-001
3HAC075545-001
Article number
3HAC077789-001
3HAC077787-001
-
3HAC077790-001
-
-
Article number
-
3HAC061327-051
3HAC075056-001
3HAC061327-047
3HAC061327-043
3HAB3413-312
-
-
© Copyright 20212022 ABB. All rights reserved.
Note
Also order new Cable tie:
3HAC075545-001.
For securing joint unit cable.
Note
For joint units on axes 4, 5 and 6.
Attachment screws M3x12 (4 pcs)
are enclosed.
Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.
Used to handle drive board con-
nectors.
For protection of drive board
during cabling installation on joint
unit.
HellermannTyton 110-70084 or
similar
Content is defined in section
Standard toolkit on page 749.
Note
Axis-4 cover
Replace if damaged.
Cover inside housing
Replace if damaged.
Cover for axis 2/3
Replace if damaged.
Tubular cover
Replace if damaged.
M3x12 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue
For tubular cover.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
Isopropanol
Loctite 574
Product manual - CRB 15000
3HAC077389-001 Revision: E