ABB CRB 15000 Product Manual page 154

5 Repair
5.3.1 Replacing the base cabling
Continued
Refitting the base cabling
Use these procedures to refit the base cabling.
Refitting the base cabling
1
2
3
Continues on next page
154
Action
Insert the cabling into the base.
Orient the base connector so that it points to the
right, seen from back of the robot.
Secure the base connector with the attachment
screws.
© Copyright 20212022 ABB. All rights reserved.
Note
xx2100000408
xx2100000409
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (4 pcs).
Tightening torque: 0.8 Nm.
xx2100000406
Product manual - CRB 15000
3HAC077389-001 Revision: E