ABB CRB 15000 Product Manual page 474

5 Repair
5.5.1 Replacing the base
Continued
Required spare parts
Spare part
Base
Flange socket head screw with
glue
Flange socket head screw with
glue
Cable tie
Cable tie
Required tools and equipment
Equipment
Lifting aid
Guide pin, M4x120
Protection plate
Cable tie gun EVO7
Standard toolkit
Required consumables
Consumable
Cable tie
O-ring, nitrile rubber
Continues on next page
474
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 20212022 ABB. All rights reserved.
Article number Note
3HAC073922-001 Also order new attachment
screws for the axis-1 and axis-2
joint unit: 3HAB3413-435 (24
pcs).
3HAB3413-435 M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAB3413-435 M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAC075545-001 For securing joint unit cable.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3.
3HAC077790-001 For protection of drive board
during cabling installation on joint
unit.
- HellermannTyton 110-70084 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
3HAC075545-001 For securing joint unit cable.
3HAB3772-119 Axis-1 brake release unit
Replace if damaged.
749.
Product manual - CRB 15000
3HAC077389-001 Revision: E