78
C
5: C
HAPTER
ONFIGURING THE
Display Ethernet
Encapsulation Type
P
LATFORM
Display the current Ethernet encapsulation type of the CoreBuilder 9000
ATM Enterprise Switch. The Ethernet encapsulation type parameter
determines how the CoreBuilder 9000 ATM Enterprise Switch interprets
Ethernet frames that enter through the Ethernet management port. For
more information, see "Ethernet Encapsulation Type" on page 418.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 7 1
The following message is displayed:
Current Eth Type is: ETH.
The current Ethernet Type configuration is displayed.
(1) SET: Switch Setup
(2) MNG: Management Setup
(7) ETH: Ethernet Type Setup
(1) GET: Get Ethernet Type
1 1 2 7 1
The current Ethernet Type configuration is displayed.
Current Eth Type is: