Reset Elan; Rst: Les Restart Elan - 3Com CoreBuilder 9000 User Manual

304 C 9: M
HAPTER ANAGING

Reset ELAN

LAN E
MULATION
Disconnect the control distribute channel to all LECs that are attached to
the specified ELAN.
This feature enables the user to reset the LANE Services without
rebooting the CoreBuilder 9000 for the following purposes:


Shutdown of the redundant LANE Services to force all LECs to return
to the primary LANE Services after a failure has occurred.


Achieving a new LES configuration when updated (invoked by the
switch software automatically), for example, frame size change.


Troubleshooting, when there are problems with the connections of
LECs to the LES.
Resets general LAN Emulation statistics for a specified ELAN to zero.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 5 2
ELAN with ELAN ID 2 is reset.
(2) LEM: LAN Emulation
(2) LES: LE Services

(5) RST: LES Restart ELAN

Format or Range
1–16
For more information, see "Display ELAN Parameters in
LES Database" on page 278.
2 2 5 [parameters]
Specified ELAN is reset.
ELAN is reset.