Update Le_Arp Response Policy For Route Descriptor; Srd: Set Arp Pol. For Non-Reg Rd - 3Com CoreBuilder 9000 User Manual

Update LE_ARP
Response Policy for
Route Descriptor
Update the additional policy for handling LE_ARP requests for a Token
Ring ELAN: Reject Request or Forward Request. The new response policy
goes into effect immediately. This is a global setting for all the clients in
that ELAN. The factory default value is Forward Request. See Table 39 for
a description of LE_ARP route descriptor policies.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Response policy
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 3 1 7 2 1
The following message is displayed:
Policy was successfully saved on flash.
The LE_ARP response policy for Route Descriptors of the ELAN with ELAN
ID 2 is updated to Reject.
LE_ARP Policy Configuration
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup

(7) SRD: Set ARP Pol. for non-reg RD

Format or Range
1–16
For more information, see "Display ELAN Parameters in
LES Database" on page 278.
1-Reject
2-Forward Request
For more information, see Table 39 LE_ARP Policies for
Route Descriptor.
2 2 3 1 7 [parameters]
The LE_ARP response policy for Route Descriptors in
the specified ELAN is updated. The update takes place
immediately.
Policy was successfully saved on flash.
291