Enable Lecs - 3Com CoreBuilder 9000 User Manual

Enable LECS

Enable the LECS in the CoreBuilder 9000 ATM Enterprise Switch after the
next reboot. This command also enables the resident LESs.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
LECS service status is set for the next reboot.
(1) SYS: Platform Setup
(1) SET: Switch Setup
1 1 5 2 2
The LECS is enabled after the next reboot. The LES is
also enabled.
LECS service status is set for the next
reboot.
1 1 5 2 2
LAN Emulation Services Setup
(5) SLE: LE Setup
(2) LCS: LECS Setup
(2) ELS: Enable LECS services
231