Update Maximum Nni Hops; Smd: Nni Set Maximum Number Of Hops - 3Com CoreBuilder 9000 User Manual

182 C 7: C
HAPTER ONFIGURING
Update Maximum
NNI Hops
V C
IRTUAL HANNELS
Enter the new Maximum NNI Hops parameter to update the Maximum
NNI Hops parameter of the CoreBuilder 9000 ATM Enterprise Switch. The
choice of parameter value depends on the size and topology of the
network. For a hierarchically designed network, it is normally chosen to
be 7. For more information, see "Hop Limit — Avoiding loops" on page
370.
Command Actions
Enter the menu sequence: (1) SYS: Platform configuration
Enter a parameter at the prompt
Parameter
Number of hops
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 2 9
The following message appears:
NNI max hops was set.
The Maximum NNI Hops parameter is updated to 9.
(1) SET: Switch setup
(3) NNI: NNI setup
(2) SMD: NNI Set maximum number
hops
Format or Range
0-120
1 1 3 2 [parameters]
The maximum number of hops permissible for NNI
routing is displayed.
NNI max hops was set.