Setting The Bridge Spanning Tree Hello Timer; Setting The Bridge Spanning Tree Maximum Age; Setting The Spanning Tree Bridge Priority - 3Com SuperStack II Manual

Setting the Bridge
Spanning Tree Hello
Timer
Setting the Bridge
Spanning Tree
Maximum Age
Setting the Spanning
Tree Bridge Priority
You can set the bridge hello timer spanning tree parameter of the current
Switch using the
stpHelloTime
To set the bridge spanning tree hello timer:
1 At the Top-level menu, enter:
bridge stpHelloTime
The following prompt is displayed:
Enter new value in seconds (1-10) [2]:
2 Enter the new value for the hello timer.
You can set the bridge maximum age spanning tree parameter of the
current Switch using the
To set the bridge spanning tree maximum age:
1 At the Top-level menu, enter:
bridge stpMaxAge
The following prompt is displayed:
Enter new value in seconds (6-40) [20]:
2 Enter the new value for the maximum age.
You can set the spanning tree bridge priority of the current Switch using
the
stpPriority
To set the spanning tree bridge priority:
1 At the Top-level menu, enter:
bridge stpPriority
The following prompt is displayed:
Enter new hexadecimal value (0x0-0xffff) [0x8000]:
2 Enter the new hexadecimal value for the bridge priority. (The default
option indicates the current value of the stpPriority MIB item.)
Displaying and Changing Bridging/VLANs Information
command on the Bridge menu.
command on the Bridge menu.
stpMaxAge
command on the Bridge menu.
115