Display De-Registered Atm Addresses At Port - 3Com CoreBuilder 9000 User Manual

138 C 6: M
HAPTER ANAGING
Display De-registered
ATM Addresses at
Port
Port ATM address: Network prefix
number
------- --------------------------------------- ------------------------------
<3.1.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. *
<3.1.2> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. *
N I
ETWORK NTERFACES
Display UME, static ATM or NNI addresses at the specified port that were
de-registered via LMA or UME but whose connections are still active.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 1 3 0.0
The following information is displayed:
(1) ADD: Get ATM Addresses
(3) ACT: Get Not Active Registered
ATM Addresses at Port
Format or Range
<slot.group.port> (0.0 for all ports)
3 1 3 [parameters]
The de-registered UME, static ATM or NNI addresses
for the specified port are displayed.
Information is displayed as shown in the example.
ATM address:user_part
*. *. *. *. *. *. *
*. *. *. *. *. *. *
Member
number
31101
31201