Display Ilmi Channel Polling Status - 3Com CoreBuilder 9000 User Manual

128 C 6: M
HAPTER ANAGING
Display ILMI Channel
Polling Status
N I
ETWORK NTERFACES
Display the ILMI channel polling facility status for the specified port of the
CoreBuilder 9000 ATM Enterprise Switch. If enabled, the ILMI channel
VPI/VCI = (0/16) is periodically polled for connectivity. For more
information, see "Status Information" on page 324.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 4 1 3.1.2
The following message is displayed:
ILMI polling is ENABLED.
(1) SET: Switch Setup
(8) IME: ILMI Setup
(4) POL: Polling Setup
(1) GST: Get Polling Status
Format or Range
<slot.group.port>
1 1 8 4 1 [parameters]
The ILMI Polling status for the specified port is
displayed.
ILMI polling is <ENABLED/DISABLED>.