Update Ilmi Version - 3Com CoreBuilder 9000 User Manual

Update ILMI Version

Update the ILMI Version for the specified port in the CoreBuilder 9000
ATM Enterprise Switch.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Port ID
IMLI version
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 1 2 3.1.2
The following message is displayed:
ILMI version is reconfigured.
The ILMI version of port 3.1.2 is updated to 3.1.
(1) SET: Switch Setup
(8) IME: ILMI Setup
(1) VER: ILMI Version Setup
(2) SET: Set & Save ILMI Version
Format or Range
<slot.group.port>
0 to update to version 3.0
1 to update to version 3.1
1 1 8 1 2 [parameters]
The ILMI Version is updated for the selected port.
ILMI version is reconfigured.
1
ILMI Setup 123