Table of Contents
Advertisement
Learning Basic Operations
Display of DUT Connection and Measurement Result
3-30).
Figure 3-30
Measurement parameter 1 changed to Ls
Measurement and display of all set measurement points
(list measurement)
In Figure 3-28 on page 69 and Figure 3-29 on page 70, only one of the set measurement
points is selected for measurement and display. However, measurement and display can
also be executed at all of the set measurement points simultaneously by following this step.
Step 1. On the single point measurement display, press the
key on the measurement
[Meas View]
block (MEASUREMENT) of the front panel once to select the list measurement display
(Figure 3-31).
Chapter 3
71
Advertisement
Table of Contents
