Table of Contents
Advertisement
C
Using the Data Logger
Automatic - Continuous Mode
N O TE
10
The Automatic- Continuos mode allows the data to be transferred to
the PC automatically and continuously with a specific log interval.
Procedures:
1 Click to select Automatic- Continuous in the logging mode list on
the Data Logger window.
2 In this mode, the logging count option is disabled and you can only
set the desired log interval in seconds by clicking on the up/down
button, click and drag the slider or key in the required value as
shown below.
Key in value
Slider
3 Uncheck the Log readings to file option if you do not wish to store
data in the PC. The Log readings to file option is enabled by
default. The data will be saved as a .csv file.
4 Click
to save the data a different location. A Log file name:
dialog box will appear. Enter the file name in the File name text
box. Choose the desired folder in the Save in: drop- down list.
5 Click Save and your data will be saved as a CSV file with the
specified file name and in the respective location.
6 Click on Start button to start your data logging. The data will be
displayed as Time and Value on Measurements table.
7 Click on Stop & Exit to stop data logging and exit the Data Logger
window.
To start a new data logging, you need to stop and exit from the Data Logger
window.
Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide
Up/Down
button
Advertisement
Table of Contents
