Fuser Error Rap - Xerox WORKCENTRE 3119 Service Manual

Status Indicator RAPs

8 Fuser Error RAP

Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
A message "Open Heat Error/Over heat/Heating Error" is displayed.
Check and Cause
1. Drive gear, PL 6 has melted.
2. Check the halogen lamp operation using
Engine Test Mode, GP 4.
3.Check the thermistor, PL 5 for damage.
4. Check the following parts:
• Thermostat, PL 5
• Fuser harness, PL 5
• Halogen lamp, PL 5
2-12
WARNING
1. Check the drive assembly, PL 6. Install a
new drive assembly if necessary.
2. Install new parts as necessary:
• Halogen lamp, PL 5
• Fuser, PL 5
3. Install new parts as necessary:
• Thermistor, PL 5
• Fuser, PL 5
4. Install new parts as necessary:
• Fuser harness, PL 5
• Thermostat, PL 5
• Halogen lamp, PL 5
• Fuser, PL 5
07/06
Solution
WorkCentre 3119