Table of Contents
Advertisement
Y
N
Go to Flag 3 and check Q11-333.
Refer to:
•
11G-110 2K LCSS PWB Damage RAP.
•
GP 11 How to Check a Sensor.
•
P/J314, 2K LCSS PWB.
•
11D-110, 2K LCSS Power Distribution RAP.
•
REP 11.13-110 2K LCSS Un-docking.
Repair or install new components as necessary:
•
Bin 1 lower level sensor Q11-333, PL 11.12 Item 3.
•
2K LCSS PWB, PL 11.26 Item 1.
Figure 2. Enter dC330 code 11-334. Actuate the bin 1 upper limit switch, S11-334. The
play changes.
Y
N
Go to Flag 5 and check S11-334.
Refer to:
•
11G-110 2K LCSS PWB Damage RAP.
•
GP 13 How to Check a Switch.
•
P/J315, 2K LCSS PWB.
•
11D-110 2K LCSS Power Distribution RAP.
Repair or install new components as necessary:
•
Bin 1 upper limit switch, PL 11.10 Item 3.
•
2K LCSS PWB, PL 11.26 Item 1.
Enter dC330 code 11-335, actuate the bin 1 lower limit switch, S11-335. The
changes.
Y
N
Go to Flag 6 and check S11-335.
Refer to:
•
11G-110 2K LCSS PWB Damage RAP.
•
GP 13 How to Check a Switch.
•
P/J317, 2K LCSS PWB.
•
11D-110 2K LCSS Power Generation RAP.
•
REP 11.13-110 2K LCSS Un-docking.
Repair or install new components as necessary:
•
Bin 1 lower limit switch, PL 11.12 Item 1.
•
2K LCSS PWB, PL 11.26 Item 1.
Enter dC330 code 11-331, actuate the bin 1 90% full sensor, Q11-331. The display changes.
Y
N
Go to Flag 7 and check Q11-331.
Refer to:
•
11G-110 2K LCSS PWB Damage RAP.
•
GP 11 How to Check a Sensor.
•
P/J316, 2K LCSS PWB.
A
WorkCentre 5687 Family
A
•
11D-110, 2K LCSS Power Distribution RAP.
Repair or install new components as necessary:
•
Bin 1 90% full sensor Q11-331, PL 11.10 Item 5.
•
2K LCSS PWB, PL 11.26 Item 1.
As final actions, check the following sequence of operation:
•
When bin 1 is empty and at the top, the bin 1 lower level sensor, Q11-333 is actuated by
the edge of the tray and the bin 1 upper level sensor, Q11-332 is de-actuated.
•
Paper is delivered to the tray until the bin 1 upper level sensor, Q11-332 is actuated.
•
The motor lowers the tray until the bin 1 upper level sensor, Q11-332 is de-actuated.
•
As the tray is lowered to accommodate the increase in stack height, the Bin 1 lower level
sensor, Q11-333 is held actuated by the stack rear edge.
dis-
•
When the tray is emptied, the tray returns to the home position; the bin 1 lower level sen-
sor, Q11-333 is de-actuated and the tray is elevated until both the bin 1 lower level sensor,
Q11-333 and bin 1 upper level sensor, Q11-332 are made. The tray is then lowered until
the bin 1 upper level sensor, Q11-332 is just cleared. In the home position the bin one
upper limit switch, S11-334 is also actuated.
display
Figure 1 Component location
August 2007
11-030-110, 11-334-110, 11-335-110, 11-336-110
2-293
Bin 1 lower level sensor
Q11-333
Bin 1 upper level sensor
Q11-332
Status Indicator RAPs
Hide quick links:
Advertisement
Chapters
Table of Contents
