Xerox WorkCentre 5687 Series Service Manual page 454

• Drives between inverter and the main drives module, PL 10.15.
• Post fuser exit roller, PL 10.12 Item 9.
NOTE: Excessive post fuser exit roll wear causes buckle between the fuser and the
inverter assembly. This can cause severe ripple on the trail edge of A3 (11x17 inch) sheet
and paper jams.
• Upper baffle, (32-55 ppm) PL 10.12 Item 23, (65-87 ppm) PL 10.12 Item 22.
• Baffle guide, PL 10.13 Item 3.
Fuser exit switch
S10-100
Upper baffle
Figure 1 Component location (67-87 ppm)
Status Indicator RAPs
10-107, 10-108, 10-109, 10-110
Fuser exit switch
S10-100
Inverter path solenoid
SOL10-045
August 2007
2-262
Inverter path solenoid
Upper baffle
SOL10-045
Figure 2 Component location (32-55 ppm)
WorkCentre 5687 Family