002-500 UI Error RAP
BSD-ON:
BSD 2.1 Control Panel
002-500 CUI scan panel UI detection error.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
Ensure that all connectors on the UI assembly,
3.10 Item 6
are securely connected. Ensure that all surface mounted modules on the ESS
PWB are securely connected.
3.
Check the wiring between the ESS PWB and the UI assembly.
4.
Reload the software,
GP
4.
5.
If the fault persists, install a new components as necessary:
•
UI assembly,
PL 2.05 Item
7.
•
ESS PWB,
PL 3.10 Item
6.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10.
PL 2.05 Item 7
and the ESS PWB,
PL
April 2017
2-15
Status Indicator RAPs
002-500