Xerox WorkCentre 5687 Series Service Manual page 535

Y N
Go to Flag 4. Check S11-334.
Refer to:
• 11F-120 1K LCSS PWB Damage RAP.
• GP 13 How to Check a Switch.
• P/J5, 1K LCSS PWB
• 11C-120 1K LCSS Power Distribution RAP.
Repair or install new components as necessary:
• Bin 1 upper limit switch, PL 11.106 Item 3.
• 1K LCSS PWB, PL 11.124 Item 1.
Enter dC330 code 11-335, bin 1 lower limit switch, S11-335, actuate S11-335. The
changes.
Y N
Go to Flag 5. Check S11-335.
Refer to:
• 11F-120 1K LCSS PWB Damage RAP.
• GP 13 How to Check a Switch.
• P/J4, 1K LCSS PWB.
• 11C-120 1K LCSS Power Distribution RAP.
• REP 11.13-110 1K LCSS Un-docking.
Repair or install new components as necessary:
• Bin 1 lower limit switch, PL 11.106 Item 3.
• 1K LCSS PWB, PL 11.124 Item 1.
Enter dC330 code 11-331, bin 1 90% full sensor, Q11-331. Actuate Q11-331. The
changes.
Y N
Go to Flag 6. Check Q11-331.
Refer to:
• 11F-120 1K LCSS PWB Damage RAP.
• GP 11 How to Check a Sensor.
• P/J2, 1K LCSS PWB.
• 11C-120 1K LCSS Power Distribution RAP.
Repair or install new components as necessary:
• Bin 1 90% full sensor Q11-331, PL 11.106 Item 5.
• 1K LCSS PWB, PL 11.124 Item 1.
As final actions, check the following sequence of operation:
• When bin 1 is empty and at the top, bin 1 upper limit switch, S11-334 is actuated and the
bin 1 upper level sensor, Q11-332 is de-actuated.
• Paper is delivered to the tray until the bin 1 upper level sensor, Q11-332 is actuated.
• The motor lowers the tray until the bin 1 upper level sensor, Q11-332 is de-actuated.
• When the tray is emptied, the tray returns to the home position. In the home position the
bin one upper limit switch, S11-334 is actuated.
WorkCentre 5687 Family
display
Bin 1 upper level
sensor Q11-332
display
August 2007
11-030-120, 11-334-120, 11-335-120, 11-336-120
2-343
Figure 1 Component location
Status Indicator RAPs