Ipv6 Nd Ra-Lifetime; Ipv6 Nd Reachable-Time - Dell Force10 S4810P Reference Manual

off-link
Defaults Not configured.
Command Modes INTERFACE
Usage
The description of an IPv6 prefix from RFC 2461(http://tools.ietf.org/html/rfc2461) is a bit string
Information
that consists of some number of initial bits of an address.

ipv6 nd ra-lifetime

Configure the router lifetime value in the IPv6 router advertisements on an interface.
E-Series
Syntax ipv6 nd ra-lifetime seconds
To restore the default values, use the no ipv6 nd ra-lifetime command.
Parameters
seconds
Defaults 9000 seconds
Command Modes INTERFACE
Usage
The description of router lifetime from RFC 2461(http://tools.ietf.org/html/rfc2461) is:
Information
Router Lifetime: 16-bit unsigned integer. The lifetime associated with the default router in units
of seconds. The maximum value corresponds to 18.2 hours. A Lifetime of 0 indicates that the
router is not a default router and SHOULD NOT appear on the default router list. The Router
Lifetime applies only to the router's usefulness as a default router; it does not apply to
information contained in other message fields or options. Options that need time limits for their
information include their own lifetime fields.

ipv6 nd reachable-time

Configure the amount of time that a remote IPv6 node is considered available after a reachability confirmation event has
occurred.
E-Series
Syntax ipv6 nd reachable-time {milliseconds}
To restore the default time, use the no ipv6 nd reachable-time command.
(OPTIONAL) Enter the keywords off-link to not use prefixes for
on-link determination.
Enter the lifetime value in seconds. The range is 0 to 9000.
1137