Omron NY532-1500 Reference Manual page 270

Ny-series industrial pc platform

Hide thumbs Also See for NY532-1500:

Table of Contents

3 Axis Command Instructions

Master axis position

StartPosition

Slave axis position

EndOfProfile

EndOfProfile

For details on BufferMode (Buffer Mode Selection), refer to the NJ/NX-series CPU Unit Motion Con-

trol User's Manual (Cat. No. W507) or NY-series Industrial Panel PC / Industrial Box PC Motion Con-

trol User's Manual (Cat. No. W559).

Of the two cam data used to find the command positions of the master and slave axes, the one with

the smaller cam data index number is output to the Index output variable. Use this value for fine-tun-

ing the cam data with the Cam Editor or with the user program.

In-position Check

An in-position check is not performed for this instruction.

Override Factors

You cannot set override factors with the MC_SetOverride (Set Override Factors) instruction for this

instruction.

NY-series Motion Control Instructions Reference Manual (W561)