Omron NY532-1500 Reference Manual page 24

Versions
Outline View
The information that is displayed is different for the Outline View and Detail View. The Detail View
displays the unit version, hardware revision, and other versions. The Outline View displays only the
unit version.
Checking the Unit Version of an EtherCAT Slave
You can use the Production Information while the Sysmac Studio is online to check the unit version
of an EtherCAT slave. Use the following procedure to check the unit version.
1
Double-click EtherCAT under Configurations and Setup in the Multiview Explorer. Or, right-
click EtherCAT under Configurations and Setup and select Edit from the menu.
The EtherCAT Tab Page is displayed.
2
Right-click the master on the EtherCAT Tab Page and select Display Production Information.
The Production Information Dialog Box is displayed.
The unit version is displayed after "Rev."
Changing Information Displayed in Production Information Dialog Box
Click the Show Detail or Show Outline Button at the lower right of the Production Information Dia-
log Box.
The view will change between the production information details and outline.
22
Outline View
Detail View
Detail View
NY-series Motion Control Instructions Reference Manual (W561)