How To Assign Virtual Pir - NEC Univerge sv8500 Manual

2.5

How to Assign Virtual PIR

2.5.1 General
Virtual PIR is a non-physical Port Interface Rack. Some PHs must be accommodated in Virtual PIR. Virtual PIR
can also be used for IP terminal, the Subline of Dterm, and voice channel for CCIS over IP.
The existing Virtual PIR data cannot be deleted while the System is in on-line mode (The existing Virtual
Note:
PIR data must be deleted during the off-line mode). After deleting the Virtual PIR data, the System must
be initialized.
2.5.2 Hardware Required
None
2.5.3 Installation Procedure
None
CHAPTER 2
Virtual PIR Available MGs
IMG0 IMG1
MG01 MG03
(PIR 3) (PIR 3)
(PIR 2) (PIR 2)
MG00 MG02
(PIR 1) (PIR 1)
(PIR 0) (PIR 0)
VOL.1-102
IP-RELATED BASIC FEATURE PROGRAMMING
IMG2
MG05 MG07
(PIR 3)
(PIR 2)
MG04 MG06
(PIR 1)
(PIR 0)
IMG3
(PIR 3)
(PIR 2)
(PIR 1)
(PIR 0)