Login/Logout - NEC Univerge sv8500 Manual

4.1.3

Login/Logout

START
ASYD
ASYDL
ADTM
ANPD
ASPA
ASFC
AMND
(AKYD)
(ADSL)
(ADKS)
END
CHAPTER 2
SYS1, Index 93, bit 6 = 0 : Separate Tenant Data Table
development for AMND command.
SYS1, Index 848, bits 0-3 : Assign threshold count number
for outputting System Message when Password Authentication
Failure is detected.
Assign IP Station MAC Address Registration Password.
Assign 1st DC for IP Station Password Entry access code.
Assign the special access code for IP Station Password Entry
(SRV= SSCA: Service Code Appendix, SIDA=123).
Allow IP Station Login feature on an SFC basis. SFI186 (IP Station Login)
Note: Data 0 allows the user to log in from the terminal.
Assign the MND data for the password.
Assign the key data for Desktop terminal.
Assign the key status data for Desktop terminal.
VOL.1-150
IP-RELATED BASIC FEATURE PROGRAMMING