NEC Univerge sv8500 Manual page 195

B LOC-ID: Location ID of the Target Location. (0-4095)
LOC-ID=0 is used for the Location ID of the Telephony Server.
Note:
Only the Location ID corresponding to the network address can be assigned on the AIVCL/AIVCN when
Note:
assigning settings for locally programmed terminals.
Check the SETTING OF TYPE OF SERVICE (VOICE PACKET) check box to assign the following ToS
for Voice Packet data.
Select either IP Precedence or Diffserv by clicking each appropriate radio button.
When IP Precedence is selected
Precedence: Specify the precedence in the range 0-7 (low-high).
Low Delay: Place a checkmark in the checkbox to set Low Delay to ON.
Through put: Place a checkmark in the checkbox to set High Throughput to ON.
Reliability: Place a checkmark in the checkbox to set High Reliability to ON.
Min Cost: Place a checkmark in the checkbox to set Cost Precedence to ON.
When Diffserv is selected
DCSP: Specify the DCSP in the range 0-63.
When data is not assigned, the following default value is applied.
Note 1:
PARAMETER
IP Precedence/DiffServ
Precedence
Low Delay
Throughput
Reliability
Min Cost
CHAPTER 2
Note 1
AIVCL Default ToS Value (Voice Packets)
DEFAULT
IP Precedence
5
OFF
OFF
OFF
OFF
VOL.1-135
IP-RELATED BASIC FEATURE PROGRAMMING
REMARKS

(low) 0 7 (high)
ON = Low Delay
ON = High Throughput
ON = High Reliability
ON = Cost Precedence