NEC Univerge sv8500 Manual page 183

Hide thumbs Also See for Univerge sv8500:

Table of Contents

Therefore, the configuration of Location IDs is as follows:

[Conceptual Illustration]

Hardware Required

Installation Procedure

Data Programming

STEP 1: ALOCL

Assign IP Location ID at first. This ID can be set on a network address, Point Code (PC), Fusion Point

Code (FPC) or Station Number (STN) basis. Select either of them from the drop-down list of TYPE.

When using this feature via CCIS over IP network, assign Location ID to the other Node PC.

When using this feature via FCCS network, assign Location IDs to all Node FPCs (except Self-Node

FPC) in the network.

When selecting "Network Address":

How To Use Dummy Locations

Dummy Location

Line to be controlled

Select "Network Address".

Assign the IP Address. For the Telephony Server, assign "0.0.0.0."

Assign the MASK BIT in the range 1-31 except when IP ADDRESS

0.0.0.0 is determined. When IP ADDRESS = 0.0.0.0, MASK BIT = 32 is

automatically assigned.

IP-RELATED BASIC FEATURE PROGRAMMING

Show Quick Links

Table of Contents