Analog Terminal Connection Via Analog 2Mc / Mc&Mg-Cot - NEC Univerge sv8500 Manual

4.6 Analog Terminal Connection via Analog 2MC / MC&MG-COT
Note: For necessary data assignment of analog terminals connected with UG50, refer to "UG50 Instal-
Note:
lation Guide".
START
MG data assignment
ASYDL
ANPD
ASPA
ALIDL
AISTL
(ALOCL)
(AIVCL)
END
Note 1: Be sure to assign MG-related data in advance when using MC&MG-COT.
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
Note 1
SYS1, Index 811
SYS1, Index 813
SYS1, Index 824, bit 0
SYS1, Index 880, bit 3=1
Assign 1st DC for Analog Stations.
SRV = STA
Assign the LAN information.
Assign the Station Data such as IP Station Number,
TEC, RSC, SFC.
Assign the Location ID data.
Assign IP Service Voice Control data.
VOL.1-155