Tos Control By Location Id - NEC Univerge sv8500 Manual

3.3

ToS Control by Location ID

3.3.1 General
Type of Service (ToS) control function between the IP terminals connected to the System. This function assigns
priorities to the signaling packet and voice packet to ensure efficient, reliable communication within a network.
Although the default ToS value is basically used, the ToS value can be changed on a Location ID basis, accord-
ing to the network condition. The following figure shows an example of the network configuration using ToS
Control.
Assigned by ALOCL
Priority = 5
Low Delay = ON
High Throughput = ON
High Reliability
Cost Precedence = ON
Location ID=1
3.3.2 Hardware Required
None
3.3.3 Installation Procedure
None
CHAPTER 2
ToS Control by Location ID
Location ID=0
IP Network
Assigned by AIVCL
Priority = 6
Signaling Packets
Low Delay = ON
High Throughput = ON
High Reliability
Voice Packets
Cost Precedence = ON
VOL.1-133
IP-RELATED BASIC FEATURE PROGRAMMING
Location ID=2