NEC Univerge sv8500 Manual page 1839

Step3: Place the firmware of MG-SIP128 [MG-128SIPMGJ] in a folder on a TFTP server. If the
firmware is not present, create a folder with the name of the MG-SIP128 firmware
("SP4032" in this case) in a folder on the server, and then create a subfolder named "CON-
FIG" to store the Multipoint data file (mp_data.csv). See
Step4: Save the edited Multipoint data file (mp_data.csv) in the CONFIG folder (a subfolder of the
above-mentioned firmware folder).
File Structure
Any Folder
mgsipmwlist.txt
TFTP Server software
Step5: Form the download-list file (mgsipmwlist.txt) under the firmware folder as below.
[Example]
# This is Firmware list for SN8178
00,SP4032/CONFIG/mp_data.csv,0
Note:
When adding files to the download-list (mgsipmwlist.txt), assign sequential numbers (such as 00,
01, 02,...) to all files as shown in the red frame in the image above.
Step6: Access the configuration mode and download the Multipoint data file (mp_data.csv).
<Display example of individual download>
MG(SIP)> download
--- Download menu ---
Download of all programs. (default) ---
input:1
SP4032 * Folder containing MG-SIP128 [MG-128SIPMGJ] firmware
CONFIG
MUSIC
* Download-list file, which lists download file names
* TFTP server software for download, which you need to prepare
VOL.2-1586
"File
* Folder to store Multipoint data files
* Folder to store WAVE files
Enter "download" in configuration mode.
MG-SIP128 [MG-128SIPMGJ]
Structure" below.