Ip Route-Map Set Tag - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ip route-map set tag

Configures the tag value of the route being distributed.
ip route-map route-map-name [sequence-number number] set tag tag-number
no ip route-map route-map-name [sequence-number number] set tag tag-number
Syntax Definitions
route-map-name
number
tag-number
Defaults
parameter
number
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to delete the set tag parameter in the route map.
•
All route maps having the same name but different sequence numbers are linked together and
processed in order of increasing sequence number.
•
The route-map-name and sequence-number should exist before you configure this set criteria.
Examples
-> ip route-map 111 sequence-number 50 set tag 23
-> no ip route-map 111 sequence-number 50 set tag 23
Release History
Release 6.6.1; command was introduced.
Related Commands
ip route-map action
show ip route-map
page 29-46
The name of the route map (up to 20 characters).
A number that links together the route maps. The range is 1–100.
Configures the tag number.
default
50
Creates a route map for redistribution and sets the status of the route
map to permit or deny.
Displays the configured IP route maps.
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009