Clear Arp-Cache - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

clear arp-cache

Deletes all dynamic entries from the ARP table.
clear arp-cache
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This commands only clears dynamic entries. If permanent entries have been added to the table, they
must be removed using the no form of the
•
Dynamic entries remain in the ARP table until they time out. The switch uses the MAC Address table
timeout value as the ARP timeout value. Use the
timeout value.
Examples
-> clear arp-cache
Release History
Release 6.6.1; command was introduced.
Related Commands
ip service
show arp
MIB Objects
alaIpClearArpCache
page 29-54
ip service command.
mac-address-table aging-time
Adds a permanent entry to the ARP table.
Displays the ARP table.
OmniSwitch 6250 CLI Reference Guide
IP Commands
command to set the
November 2009