Ip Route-Map Set Ip-Nexthop - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ip route-map set ip-nexthop

Configures the IP address of the next hop in a route map.
ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address
no ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address
Syntax Definitions
route-map-name
number
ip_address
Defaults
parameter
number
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to delete the set ip-nexthop parameter in the route map.
•
All route maps having the same name but different sequence numbers are linked together and
processed in order of increasing sequence number.
•
The route-map-name and sequence-number should exist before you configure this set criteria.
Examples
-> ip route-map 222 sequence-number 50 set ip-nexthop 128.251.17.224
-> no ip route-map 222 sequence-number 50 set ip-nexthop 128.251.17.224
Release History
Release 6.6.1; command was introduced.
page 29-48
The name of the route map (up to 20 characters).
A number that links together the route maps. The range is 1–100.
IP address of the next hop.
default
50
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009